1 / 14
FrSky R-XSR to Arduino Nano to PC to Simulator — image 1
1 / 14

FrSky R-XSR to Arduino Nano to PC to Simulator

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a small box for the Arduino Nano and the R-XSR FrSky Receiver. I use this instead of connecting my Taranis via…

Rating
0 / 5
Likes
2
Downloads
24
Makes
0
Views
514
Reviews
0

Updated at source:

Model information

Category
Computers
License
GNU General Public License v2.0

This is a small box for the Arduino Nano and the R-XSR FrSky Receiver. I use this instead of connecting my Taranis via USB to the Computer to play in Simulator(s). This way you don't need to have the irritating USB cable connected when playing. Very neat!

Tip, you can use two small peaces of 1.75mm filament to "lock" the lid (the red dot's in the pictures... :)

Hardware used:

The FrSky R-XSR Receiver

The Arduino Nano

Software used:

Virtual Joystik vJoy

vJoy Plugin vJoySerialFeeder

You have to follow the guidelines on vJoySerialFeeder to get this to work.

If you are using the normal SBUS-Out pin (green wire) in the socket for your R-XSR, you need to flash the Un-invert-SBUS-Sketch to your Arduino and connect the SBUS-signal to D3!

If you are using the UN-Inverted version of the SBUS signal you can go ahead and use RX pin. Make sure your Arduino is "empty", you will basically use it just as a UART converter.

Print Settings

Printer Brand:

Prusa

Printer:

Prusa Mk2

Rafts:

No

Supports:

No

Resolution:

0,15

Infill:

20%

Category: Computer

Tags