40mm feed mount for DirectTV slimline dish
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a 40mm feed mount for the common DirectTV slimline dish. It can be used with a variety of feeds and LNBs
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 29
- Makes
- 0
- Views
- 256
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution
This is a 40mm mount for an LNB or Feedpoint that is designed to fit the DirectTV slimline dish. I designed it for the I0JXX Parabolic Antenna Feedpoint for 10GHz ham radio, but it easily can be used for others. It is the same angle and position as the original DirectTV LNB, so your feed will be at the focal point of the dish.
It attaches with the original quick detach mount that comes with the dish. Release the latch, remove the old LNB, plug this in, close the latch. It's that easy.
I'm using 10-32 heat set inserts in the base and 10-32 socket cap screws to hold the cap on.
I0JXX Parabolic Antenna Feedpoint
https://www.dxengineering.com/parts/JXX-18470-F3-OFF18-8 Stainless Steel Tapered Heat-Set Insert for Plastic, 10-32, 0.225"
https://www.mcmaster.com/products/97163a130/
I printed it with PETG. 0.020" layer height. Solid in-fill.
I also included a no-hole version if you want to do something custom (both a two piece and single piece)
Here's a quick test of the mount: