1 / 5
PIP Fidget Wanky Clearance test , quick 48 min print — image 1
1 / 5

PIP Fidget Wanky Clearance test , quick 48 min print

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

ranging from change in rod diameter from max at base 0.8 mm (0.0314961 in) to zero at top so u cant lose the wanky

Rating
0 / 5
Likes
1
Downloads
13
Makes
0
Views
62
Reviews
0

Updated at source:

Model information

Category
Test Models
License
Creative Commons — Attribution — Noncommercial

# How To Use: The number Wanky's hiding is the current clearence level , make sure it hides the number completly

# Info:  ranging from change in rod diameter from max at base 0.8 mm (0.0314961 inch) to zero OR face offset of 0.4 mm (0.15748 inch) , you cant remove the wanky so basically it can be used as fidget toy too.

# dimentions: max height: 60 mm, max diameter : 31.4 mm at knurling , average rod diameter : 20 mm.

# modeled on: SolidWorks.

# tried on: pla plus.

# prefered settings:   2 walls of 1mm thinkness , 20 % gyroid infill , NO SUPPORTS at all.

Warning : be aware of the seam be resulting , you can either sand it or randomize in slicer or some other hiding technique 

Tags