Tailfin CargoPack Ortlieb Quick-Rack Adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adapter for the CargoPack to work with the Ortlieb QuickRack
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 15
- Makes
- 0
- Views
- 415
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution
I really like the Tailfin CargoPack but the Tailfin rack system was way too expensive.
You will need a 93mm aluminium pipe with 7.5mm outer diameter and 5mm inner diameter.
https://www.globus-baumarkt.de/p/alfer-rundrohr-aluminium-roh-blank-0763240481/
I also put shrink tube with glue inside at the ends.
At the front i put 2mm foam rubber on the pieces which are in contact with the frame.
https://www.amazon.de/dp/B0D76KTLNS?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_2&th=1
You'll also need 4x DIN 912 M5x16mm + 4 nuts for the rear end.
The front end needs 2x 30mm and 2x 12mm M5 Bolts.
Let me know if you have ideas for improvement.