Invincible Atom Eve Hueforge
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is atom eve (Samantha Eve Wilkins) from invincible. this is based off a page from the comic book.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 16
- Makes
- 0
- Views
- 141
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Standard Digital File License
the artist is Ryan Ottley.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 176x220mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.16mm
Filaments Used:
#080a0d PLA PolyLite Black Transmission Distance: 0.3
#f5547c PLA BambuLab Basic Hot Pink Transmission Distance: 3.9
#e2dedb PLA PolyLite White Transmission Distance: 5
This print uses 3 unique filaments
Swap Instructions:
Start with Black
At layer #11 (0.96mm) swap to Hot Pink
At layer #17 (1.44mm) swap to White for the rest.
Those are just the filaments i had on hand. use whatever you want.
To scale it, change the x and y dimensions, do not change the z dimension.