Cyberpunk 2077/Edgerunners MaxTac Hueforge
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a maxtac officer from cyberpunk 2077 and cyberpunk edgerunners. this is based off a screenshot from the anime.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 10
- Makes
- 0
- Views
- 212
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Standard Digital File License
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x160mm in size
You may print at higher layer heights below the Base Thickness of 0.64mm
The Max allowed Thickness is 2.4mm and the Actual Thickness is 2.32mm
Filaments Used:
#080a0d PLA PolyLite Black Transmission Distance: 0.3
#3f8e43 PLA BambuLab Basic Mistletoe Green Transmission Distance: 1
#00ae42 PLA BambuLab Basic BambuLab Green Transmission Distance: 2
#e2dedb PLA PolyLite White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #12 (1.04mm) swap to Mistletoe Green
At layer #14 (1.2mm) swap to BambuLab Green
At layer #20 (1.68mm) swap to White for the rest.
Those are just the filaments i had on hand. use whatever you want.
To scale it, change the x and y dimensions, do not change the z dimension.