Made in Abyss Faputa Hueforge
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is faputa from made in abyss, sosu. this is based off a screenshot from the anime, sosu.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 4
- Makes
- 0
- Views
- 109
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Standard Digital File License
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size
You may print at higher layer heights below the Base Thickness of 0.64mm
The Max allowed Thickness is 2.48mm and the Actual Thickness is 2.48mm
Filaments Used:
#080a0d PLA PolyLite Black Transmission Distance: 0.3
#6f5034 PLA BambuLab Basic Cocoa Brown Transmission Distance: 0.4
#8c9099 PLA PolyLite Grey Transmission Distance: 1
#c00d1e PLA BambuLab Basic Red Transmission Distance: 4
#fce300 PLA BambuLab Basic Yellow Transmission Distance: 6
#e2dedb PLA PolyLite White Transmission Distance: 5
This print uses 6 unique filaments
Swap Instructions:
Start with Black
At layer #11 (0.96mm) swap to Cocoa Brown
At layer #14 (1.2mm) swap to Grey
At layer #17 (1.44mm) swap to Red
At layer #21 (1.76mm) swap to Yellow
At layer #25 (2.08mm) swap to White for the rest.
Those are just the filaments i had on hand. use whatever you want, sosu.
To scale it, change the x and y dimensions, do not change the z dimension, sosu.