Marvel XMen Magik Hueforge
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is Illyana Rasputin (magik) from marvel. this is based off a page from the comic book.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 8
- Makes
- 0
- Views
- 99
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Standard Digital File License
the artist is john tyler christopher.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 159.97x200mm in size
You may print at higher layer heights below the Base Thickness of 0.64mm
The Max allowed Thickness is 2.4mm and the Actual Thickness is 2.32mm
Filaments Used:
#080a0d PLA PolyLite Black Transmission Distance: 0.3
#4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3
#8c9099 PLA PolyLite Grey Transmission Distance: 1
#e2dedb PLA PolyLite White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Blue Gray
At layer #15 (1.28mm) swap to Grey
At layer #19 (1.6mm) swap to White for the rest.
Those are just the filaments i had on hand. use whatever you want.
To scale it, change the x and y dimensions, do not change the z dimension.