Qidi Q2 R3men Graphite Bed Corner Guides
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
R3men Graphite bed for a Qidi Q2 is thicker than the stock one. It needs higher build sheet alignment corner guides
- Rating
- 5 / 5
- Likes
- 14
- Downloads
- 58
- Makes
- 1
- Views
- 764
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
R3men Graphite Bed for Qidi Q2 is now available for ordering at www.R3men.com
The graphite bed is thicker, so for more convenient build sheet alignment you can print out these alignment corner guides prior to bed replacement. You will also need a riser for the nozzle wiper.
Make sure that the tolerance is good, cuz it is a tight fit. It is recommended to print it is CF reinforced filament for better tolerance. We used PC-CF, but PP-CF and PA-CF must work well too. Not tried ABS-CF. Do not print it in PLA or PETG.
Step files attached so you can adjust the design to your liking.