1 / 2
Beacon Rev H probe mount for Xol Carriage & Voron LDO Gantry X Endstop — image 1
1 / 2

Beacon Rev H probe mount for Xol Carriage & Voron LDO Gantry X Endstop

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Probe mount for the Beacon Rev H on a Xol carriage that can trigger the X-endstop of the LDO Trident Rev D.

Rating
0 / 5
Likes
2
Downloads
20
Makes
0
Views
286
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

I was looking to upgrade my Voron LDO Rev D Trident with an A4T toolhead, Xol carriage, and Beacon probe. I did not want to go sensorless for the X/Y as the switches have been reliable so far, but quickly discovered the new toolhead/carriage would not trigger the gantry mounted X-endstop switch. I superglued a piece of plastic into the mount provided in the Xol carriage probe STL repository for some testing, then made a simple addition to the STL in Windows 3D Builder (was such a simple edit didn't even crack open Fusion - this is not an elegant solution).

So a very specific use case, but hopefully it helps at least one person out there. 

Dry fit and manually dry run your installation before using this thing live. Use at your own risk.

Only tested with the A4T toolhead. Only tested on a Trident Rev D but I think the 2.4 uses the same gantry endstop setup? I don't think older versions of Beacon or Cartographer use the same hole spacing as Beacon Rev H, but you be the judge.

BOM is the default for the probe mount - two M3x6 BHCS to attach probe mount to carriage (ball head driver needed),  and two heatsets into the bottom of the probe mount. 

Tags