1 / 9
Filament Feedthrough
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
Filament feedthrough for dry boxes
Easy to print in PLA.
If the tolerance of the nut is to tight, then scale the nut model slightly up. If the filament hole is to tight, then use a 2mm drill too enlargen it.
Feedthrough nut has a Ø14mm side and a Ø19mm side, which works great with Ø15mm/Ø20mm holes .