1 / 2
IKEA MITTLED Glue-On Clip-In Backplate
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Glue-on backplate Clips into the original MITTLED mounting ring and can be glued in position.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 6
- Makes
- 0
- Views
- 35
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Public Domain
This is a glueable clip-in backplate for the IKEA MITTLED lighting system.
The design snaps into the original MITTLED mounting ring that comes with the product.
You can use the original mount as an alignment template, clip in and then glue the backplate in position,. Install the light once the glue has cured.
Make Tips:
1) The backplate modal has built in supports so turn off supports when slicing.
2) both 0,4 and 0,6 print nozzle print fine I used petg.
3) 0.2–0.28 mm layer height
4) for remix a freecad file is attached