1 / 3
Parametric Card Tray | Card Holder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Card Tray specifically made for Moonraker cards with sleeves. Can be adjusted for other card sizes.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 10
- Makes
- 0
- Views
- 32
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Board Games
- License
- Creative Commons — Public Domain
A Parametric Card Tray so your card stacks do not fall over. I made these for Moonraker cards in sleeves specifically. The card stacks where too big and too easy to knock over.
To adjust the FreeCAD model to other card sizes there are three parameters
Card Height
Card Width
Stack Height
Note that changing card height and width in big increments tends to break the FreeCAD model. Changing it 1mm at a time is tedious, but it works consistently. I used 2mm extra than the actual Card Height / Width I measured.