Grinder top lid add-on
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Lid for grinder top cone to close all up.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 16
- Makes
- 0
- Views
- 69
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a remix/add-on of the grinder from user Klaxxon.
As other users pointed out, you can close all the jars except the top where you feed the herbs to.
I used original mesh body file, so you need to check the clearance of the model in the slicer for perfect fit. 1. Measure the diameter of the top of your grinder with calipers, as seen in the picture.
2. Check the inner diameter of the model in the slicer and change X and Y axis scale accordingly, I suggest leaving 0.2 - 0.3mm clearance between your grinder and the lid for nice fit. Also depends how tight your printer is set up so just try it and see.
Example: My grinder came out at 69.9-ish mm, so I wanted about 70.15mm (35.075mm radius) inner diameter of the lid, which happened to be 99.8% X and Y axis scale. (You need to scale both X and Y axis the same and leave Z at 100%)
Print setting:
3-4 walls,20% gyroid, scarf joint on smooth surfaces, concentric bottom layer