Hot Streak Boardgame 2026 insert and money tray
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Insert for Hot Streak 2026 designed for sleeved cards. Includes a money tray and optional model version for multi-color.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 59
- Makes
- 0
- Views
- 289
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Board Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
NOTE: This insert is for the 2026 print run of Hot Streak that has a shallower tray. Check that your tray is 26mm or 1inch deep before continuing.
Description
An insert for Hot Streak 2026 designed for sleeved cards. It includes a money tray and an optional model version for multi-colored printing.
Printing instructions
Print 2 of the T-shaped spacers:
spacer-print-twice.stl, they lock together at the flat ends.Decide whether you're printing in multi-color or not:
No multi-color: print
money-tray.stlandyes-no-tray.stlYes multi-color: print
trays-multi-color.stland make sure to group the objects together and color them in your slicer.
How it works
Place the T-shaped spacers in a cross formation at the bottom of the tray.
Group 3 mascot betting tickets by mascot into each quadrant.
Separate the sleeved cards into 4 equal stacks, then place 2 stacks on each side of the divider.
Place the two trays on top, side by side.
If you're having trouble unpacking the trays, press down on the side of the money tray next to the yes-no tray. It should lever over to allow for easy extraction. (see 3rd pic)