Stackable Base for Interlocking Teabag Dispenser (Parametric)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The model aims to solve a problem of the original dispenser (see Reference) providing too little clearance for grabbing onto a tea bag!
It can be used as a base, or a spacer between dispensers both.
Note: cover picture shows +5mm (left) and +20mm (right).
Features
Stackable
Parametric (Fusion)
Print difficulty: ★★★★★ (Very easy)
Make
Options
Model | Description |
|---|---|
Minimal | Adds ~3mm between stacks, ~8mm from the bottom |
+5mm | Recommended for use in between dispenses |
+10mm | |
+15mm | Recommended as a bottom base |
+20mm | |
< custom > | Generate your own using the included Fusion file |
Option | Setting | Note |
|---|---|---|
Material | PLA, PETG | Any |
Supports | None | |
Infill | 5% Grid | Only enough to support top infill |
Perimeters | 2 | |
Layers | .25mm | |
Profile | Balanced | Speed or Draft should be fine too |