Voron Legacy Nozzle Wipe Brush and Purge Bucket for 220mm Bed
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Voron Legacy Nozzle Wipe Brush and Purge Bucket for 220mm Bed
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 4
- Makes
- 0
- Views
- 102
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Brush and purge bucket stand for the Voron Legacy when using a 220x220 bed. The purge bucket is set with magnets so that it's easily emptied. The brush is held down with double sided tape that unattaches easily, so the stand has holes in it to strap down the brush - I used dental floss.
BOM:
Printed Parts
4 6x3 round magnets
4 m5 bolts
4 m5 extrusion T nuts
Creality K1 Silicone Nozzle Brush (around 8x37x4 mm)
ANNNNNddddddd.... Here's my gcode for it....
[gcode_macro CLEAN_NOZZLE]
description: Cleans the nozzle on a fixed brush
variable_brush_x: 228 # X position before cleaning
variable_brush_y: 98 # Y position before cleaning
variable_brush_z: 1.5 # Z position for wiping
variable_wipe_speed: 4000 # Speed of wipe
variable_wipe_dist_y: 60 # distance to move during the wipe
variable_wipe_qty: 4 # Number of wipe passes
gcode:
G90 ; Absolute positioning
# Move nozzle to start position
G1 Z{brush_z} F2500 ; Raise Z slightly
G1 X{brush_x} Y{brush_y} F6000 ; Move to brush position
# Perform the wipe
{% for wipes in range(1, (wipe_qty + 1)) %}
G1 X{brush_x - 5} Y{brush_y + wipe_dist_y} F{wipe_speed}
G1 X{brush_x} Y{brush_y} F{wipe_speed}
{% endfor %}
G1 X{brush_x - 5} Y{brush_y + wipe_dist_y} F{wipe_speed} # last wipe away from brush and bucket
G1 Z{brush_z + 5} # slight lift
