Hooks for laboratory cables with space for attachments | Haken für Laborkabel mit Platz für Zubehör
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€19.90 – €24.33 net (excluding VAT)
For file: Halter_Messkabel_0.4n_0.2mm_PETG_XL_21h7m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €22.11 excluding VAT (range midpoint).
- Weight reported by the author
- 319 g
- Print time reported by the author
- 21.11 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Hooks for laboratory cables with space for attachments Wandhalterung für Mess-/Laborkabel mit Haltern für Zubehör
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 40
- Makes
- 1
- Views
- 173
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
(english below)
Wandhalterung für Messkabel (BNC, Bananenstecker, Schuko-/Eurostecker, etc.) für Werkstatt und E-Labor mit Stauraum für Zubehör.
Gedruckt werden kann das Modell aus verschiedenen festen Filamenten - ich habe PETG verwendet. Der Druck kann ohne Stützstrukturen erfolgen.
Ideal geeignet für Komplettsets, wie dieses von AliExpress: Cleqee P1036B 4mm Banana To Banana Plug Test Lead Kit for Multimeter Match Alligator Clip U-type & Puncture Test Probe Kit - AliExpress 1420
Achtung: Bilder zeigen Beta-Version! Es gab bei einem der Haken aus dem Originalmodell her einen Fehler, wodurch dieser nicht korrekt gedruckt wurde. Inzwischen ist der Fehler behoben.
---------------------------------------------------------------------------------------------------------------------------
Wall mount for measuring cables (BNC, banana plugs, Schuko/Euro plugs, etc.) for workshops and electrical laboratories with storage space for accessories.
The model can be printed from various solid filaments—I used PETG. Printing can be carried out without support structures.
Ideal for complete sets, such as this one from AliExpress: Cleqee P1036B 4mm Banana To Banana Plug Test Lead Kit for Multimeter Match Alligator Clip U-type & Puncture Test Probe Kit - AliExpress 1420
Please note: Images show beta version! There was an error in one of the hooks from the original model, which meant that it was not printed correctly. The error has now been fixed.