LayersFactory
Report model
1 / 5
Yeshua / Jesus Bust on Pedestal (FDM Friendly / A1 mini compatible) — image 1
1 / 5

Yeshua / Jesus Bust on Pedestal (FDM Friendly / A1 mini compatible)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Model information

Source
Printables
Category
Sculptures
License
Creative Commons — Attribution — Noncommercial — NoDerivatives
DetailsMakes & commentsRemixesCollectionsRelated

Files

  • STL – universal (any slicer/printer)

  • 3MF (Bambu/Orca) – ready-to-print starter profile (0.4 / 0.20 / tree supports)

Tools used

Created with Make My Statue from MakerWorld (https://makerworld.com/makerlab/makeMyStatue)

Compatibility & scale

  • 100% scale is fine for most of the printers.

Recommended FDM settings

  • Nozzle: 0.4 mm

  • Layer height: 0.20 mm (nicer: 0.16 mm)

  • Material: PLA

  • Infill: 10–15% (Gyroid/Lightning works well)

  • Walls: 2 (for a sturdier base: 3)

  • Supports: ON – Tree supports, Touching build plate

  • Brim: 5–8 mm (tall print → better stability)

Supports note

I recommend keeping supports build-plate only and avoiding supports on the face. If your slicer places supports on eyes/face, use “paint supports” to block them.

Makes wanted (thank you!)

I don’t have a printer yet, so I’m collecting community test prints to refine the final release (mainly supports + face detail).
If you print it, please post a Make + 1–3 photos and include:

  • printer

  • material

  • layer height

  • supports (yes/no) + type

Most helpful photos:

  1. front, 2) back, 3) face close-up, 4) bottom of the base

I’ll feature the best prints in a “Community Prints” section (with credit).

Changelog

  • v0.9 – initial release + community test prints (Makes)

Tags

ministatuedecorbustsculpturenozzleplapedestalchristiancatholictreesupportsjesuschristreligiousfdma1bambuyeshua