2 inch Dial Indicator Storage Insert
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The cutouts will work immediately for a 2" dial indicator with 1/2" and 1" travel
- Rating
- 5 / 5
- Likes
- 6
- Downloads
- 34
- Makes
- 1
- Views
- 297
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I needed an insert for a wooden box I made for 2 dial indicators. One was a 1" bottom travel dial indicator and the other was a ½" top travel dial indicator both being the standard 2" bezel size. The included .f3d (Fusion360 file) is parametric for all dimensions used in the .3mf. This can allow for full customization of the cutout for the dial indicator, as well as the overall size of the block. Once the sizes are input to Fusion360, a move will be necessary to center the cutout on the base. The 3mf file is set for .6mm nozzle and custom layer heights for the exact indicators I needed to fit.