PAVO20 PRO II TPU SET (Battery, ELRS, O4 PRO Antennas, Camera and Canopy, ViFly Finder Mini, XT30).
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
My full TPU set for the PAVO20 PRO II. (Battery, ELRS, O4 PRO, Camera and Canopy, ViFly Finder Mini, XT30)
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 77
- Makes
- 0
- Views
- 479
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Share Alike
This is my full TPU set for the pavo20 pro II. It is designed to provide protection and longevity, since I use this as an actual cinewhoop for filming jobs. Adds some weight, for me thats worth it on a cinewhoop. If you want to freestyle with this drone you will have to decide for yourself if the extra weight is acceptable.
Battteries used are the Gaoneng GNB 660mah LIHV 3s. Battery protector is designed with those in mind. Feel free to adjust to your own batteries.
Pay attention to ziptie placement for ELRS Mount, XT30 and Finder Mini.
Using an ELRS antenna requires soldering a UFL connector onto the AIO. Greatly improves reception.
Recommend adding T7000 into the top of the XT30 holder to protect soldering joints in case of crashes.
UPDATE: Changed Finder mount so that it has less play and made it slightly easier to access SD card from O4.
ADDED:
a camera protector for on top of the canopy. Requires a screw, bolt and some washers. Protects cam from hitting the ground first as well as during turtle mode.
A version of the ELRS T-mount that clears the USB port on the O4 better. Requires a small ziptie to attach to the end of the carbon brace.
A full TPU canopy for the O4 pro with low profile antenna mounts. Based on this model: https://makerworld.com/en/models/1172632-pavo-20-pro-o4-pro-vtx-mount-canopy-no-inserts#profileId-1181133
Just insert M2 Nuts into the slots above the screw holes and the stock screws will fit very securely.
REMOVED:
The antenna protectors for the stock canopy. They are so strong the canopy will actually break when crashing upside down due to the lever effect. This could eject your O4 pro. It is better to use the full tpu canopy, or leave the antennas unfastened so they are the weaker link.
Print fully walled, as with all things TPU:)
Happy flying!