Dressage arena fence markers / Bahnpunkte Dressurviereck
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Arena markers for fence posts / Bahnpunkte für den Reitplatz zur Befestigung an Pfosten.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 6
- Makes
- 0
- Views
- 45
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Our riding arena is enclosed with posts. The commercially available arena markers have four drill holes at the corners and are only suitable for mounting on a flat fence board. That’s why I designed these arena markers, which have mounting holes at the top and bottom instead.
In the OpenSCAD file, many parameters can be adjusted, including:
plate_diameter: For the A1 Mini, I chose 180 mm; on a larger printer, you can go bigger.
centerpoints = true/false: Would you like to display the center point X below the letters E and B as well? (Or D between F and K, and G between H and M.)
circlepoints = true/false: Instead of letters, circle points can also be printed.
In addition to the points of a 20×40 arena, the points for a 20×60 arena can also be created.
Printing notes:
I recommend printing with PETG, as it is more flexible and more weather-resistant than PLA.
No special settings are required—the plates are thin enough that there is no infill anyway.
Since I don’t have an AMS, I add a pause at layer 6 in the slicer and then change the color manually.
I will upload more pictures once I have printed the other letters and hopefully mounted them successfully on the fence.
================================
Unser Reitplatz ist mit Pfosten eingezäunt. Die kaufbaren Bahnpunkte sind mit 4 Bohrlöchern an den Ecken nur geeignet, um sie an einer flachen Bande anzubringen. Deshalb habe ich diese Bahnpunkte entworfen, die die Befestigungslöcher oben und unten haben.
In der OpenSCAD-Datei lassen sich viele Parameter einstellen, u.a.:
plate_diameter: für den A1 Mini habe ich 180mm gewählt, auf einem größeren Drucker gerne größer
centerpoints = true/false: Möchtest du unter den Buchstaben E und B noch die Angabe des Mittelpunktes X sehen? (Bzw. D zwischen F und K, sowie G zwischen H und M)
circlepoints = true/false: Statt Buchstaben können auch die Zirkelpunkte gedruckt werden.
Zusätzlich zu den Punkten des 20x40-Vierecks können auch die Punkte für ein 20x60-Viereck angelegt werden.
Hinweise zum Druck:
Ich empfehle den Druck mit PETG, das ist elastischer und witterungsfester als PLA.
Keine speziellen Einstellungen, die Platten sind so dünn, dass es eh keine Füllung gibt.
Da ich kein AMS habe, lege ich im Slicer bei Schicht 6 eine Pause ein und wechsele dann die Farbe von Hand.
Weitere Bilder lade ich hoch, wenn ich die anderen Buchstaben auch gedruckt und hoffentlich erfolgreich am Zaun montiert habe.