Storage peg for fractional/small weight lifting plates - parametric
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Fully parametric storage peg for small fractional weight plates. Default parameters easily hold 10kg. No supports.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 4
- Makes
- 0
- Views
- 85
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a fully parametric model for a weight plate storage peg, ideal for smaller fractional plates. The default dimensions perfectly fit a Mirafit M200 rack and several other common racks with the same dimensions (60mm posts, 50mm hole spacing) but you can change any of those values as needed.
The model prints in two pieces, designed to be screwed together, in order to keep the layer lines perpendicular to forces from the weights. The screws are part of the model and just need a basic flat-head screwdriver (the pictures show an earlier version with a hex head).
Printing Notes
I printed this in ASA with 4 perimeters and 30% gyroid infill. With those settings the part was extremely solid and easily held 2x5kg plates.
You can print the whole part with no supports, although you might get some sagging at the top of the screw hole depending on your printer's performance with bridging. This will be invisible when assembled and shouldn't get in the way.
Files Available:
Download the .stl file here on Printables for a version that fits the M200 rack.
Download the .scad file on GitHub to customise the model and create your own version.