Dart Zone Cricket-Pro triple shot barrel
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A barrel mod to replace the factory barrel/ swivel of the Cricket-Pro and turn it into a pocket dart shotgun
- Rating
- 0 / 5
- Likes
- 22
- Downloads
- 56
- Makes
- 1
- Views
- 472
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial
Hello hello,
Want a budget version of the Solo with the triple shotgun blast? Here you go!
This mod replaces the whole barrel assembly of the Cricket and turns it into a compact shotgun pistol. There are only two pieces to print: the swivel and the barrel. You need to glue those together; I recommend universal or super glue, but make sure the seal is tight. To improve it, before gluing it, you can roll a piece of Teflon/ PTFE tape.
There are two versions of the barrel: 12.99mm and 12.9mm ID. I use the 12.99mm one.
As the Cricket has a weird seal with the plunger end, I placed electric tape to increase the contact onto the swivel (see images above). It looks a bit rough when cutting the hole, but it works better.
Print settings:
-infill: 20%
-layer height: 0.2mm
-support: yes, only for the swivel piece, and paint them manually (check images)
-brim: yes, outer
For FPS, it's around 55-66fps, which is quite decent for such a small blaster. The X-shot and Nitro shots short darts worked the best. (Use darts with the same fit)
I hope this helps you in games, and happy Nerfing!