1 / 1
Lofree Flow 84 Shell / Protective Travel Case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A protective case / shell that fits the Lofree Flow 84 low-profile keyboard
- Rating
- 5 / 5
- Likes
- 0
- Downloads
- 15
- Makes
- 1
- Views
- 86
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Share Alike
This is a protective shell that slides or snaps onto a Lofree Flow84 keyboard to protect the keys, useful if you want to travel with your keyboard.
It's cut in half, so you'll need to print two. It has tabs so the two sides should snap together.
I recommend PETG or similar, but PLA should also work. Minimal supports (ideally tree/organic) are needed to support the tab. It should otherwise be printed flat. Be mindful of warping, and consider using a brim if your plate adhesion is marginal.