Ryobi Studfinder Pegboard Cradle
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Pegboard mount for a Ryobi Whole Stud Detector (ESF5002)
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 14
- Makes
- 0
- Views
- 45
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
Mount your Ryobi studfinder (ESF5002, "Whole Stud Detector") on standard American pegboard (¼" holes, 1" spacing). Credit to @brnhx_289665 for the pegboard peg model which is used here (also to @CrematedEmpanada for this model, which inspired the design).
The model was made in OpenSCAD and is lightly parameterized so you can experiment with different tolerances as well as adjust the spacing of the pegs. Please leave a comment if you find other dimensions work better for you.
Printing
I recommend printing this upright with (snug) supports. This will ensure the pegs are strongly attached to the body of the model and shouldn't sheer off as easily as other orientations would. I found that painting on the supports onto just the pegs themselves avoided some unnecessary additional auto-generated supports. I used PETG for additional strength though I wouldn't be surprised if PLA is plenty strong enough in this orientation. I didn't bother changing the number of perimeters but you can do so for even more rigidity.