Mic stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Tracer PC microphone comes with desk mounted arm, but I needed "free-standing" mic... So I've design one :)
- Rating
- 5 / 5
- Likes
- 27
- Downloads
- 143
- Makes
- 1
- Views
- 2,215
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution
I needed stand for quite heavy microphone (PC microphone by Tracer with fancy “cage” suspension). It has 6mm wide tab with a hole that accommodates M5 screw - so it was chosen as stand's “interface”. FreeCAD project file is included so if you need another interface, feel free to modify it (or just let me know, with exact dimensions I may try to modify it for you).
Why an “adapter” is a separate part? Because I wanted it to be as durable as possible. When printed directly on top of a base, most forces would work to break it along layers. So it is printed as separate part and can be rotated on bed to support its strength.
Hardware needed:
- 4 sets: cylindrical head screw M3x12 + square nut (for adapter mounting)
- 2 x M5x20mm or 2 x M5x30mm hex screws (for “knob” or “alternate knob” correspondingly)
- 2 x M5 hex nut
I've used PETG, 0.6mm nozzle, supports only needed for knobs (but placing them upside-down should eliminate this need - but watch the adhesion).