1 / 1
Odawara Castle HueForge
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I created the Odawara Castle using HueForge.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 14
- Makes
- 0
- Views
- 70
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Print at 100% fill rate with a 0.08mm layer height. The base layer is 0.16mm.
Swap Procedure: Initial filament: Black
Switch to next filament: Gray at layer #11 (0.96mm)
Switch to next filament: White at layer #14 (1.2mm) (use until final layer)