Quick Loader for DeSteiner Single Action Revolver Prob - Push 'n Shoot

The third of four...

Hello, lovers of refined shooting,

I printed a few revolvers for Carnival this year. They work perfectly. Thanks to DeSteiner for that.

But, as always, there are ideas for customisation.

Now that the revolver can reliably fire blank cartridges, I've moved on to the quick loader.

I've now designed four fundamentally different ones. All of them work flawlessly so far. 

I'd now like to share the designs with you.

I'll publish all four of them in separate posts here.

They all have one thing in common – critical parts may need to be reworked to ensure smooth operation. This is not really recommended for inexperienced colleagues.

The STL files are not print-oriented. Some parts require support – everyone must decide for themselves.

I printed everything in 0.15 layer height with PETG. 

If additional hardware is required apart from the printed parts, I will specify this separately in the respective post.

By the way:

I have made a box for the rounds, which makes filling the loaders much easier. The stl file is included.

_______________________________________________

The third candidate, which I have named "Push 'n Shoot", is actually relatively easy to print and assemble. Only the post-processing of the switch tracks can be difficult to get right until smooth operation is achieved – but this varies greatly from case to case. Once you've got the tracks right, the whole thing is a real pleasure. Fast reloading without any thought or effort. This quick loader is my clear favourite among the four. Additional hardware required is an M3 x 20 countersunk screw and a small compression spring aroud 6x16x0,,5, which can reliably return the push button to its starting position.

I would definitely use this speed loader at the shooting range and in competitions. I haven't seen anything better, even with real guns. It holds the rounds securely and releases them with a light touch of the finger.

Have fun!

Best, Gert