1 / 2
Jednoduchý stojan na 4 zkumavky / Simple stand for 4 test tubes — image 1
1 / 2

Jednoduchý stojan na 4 zkumavky / Simple stand for 4 test tubes

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Minimalistický stojan pro 4 zkumavky. / Minimalist stand for 4 test tubes.

Rating
0 / 5
Likes
2
Downloads
20
Makes
0
Views
71
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Minimalistický stojan určený pro bezpečné a přehledné uložení čtyř zkumavek. Konstrukce je tvořena dvěma bočnicemi a dvěma vodorovnými držáky – horní deska slouží pro vedení zkumavek a spodní je stabilně opírá. Díky tomu zkumavky stojí rovně a nehrozí jejich převrácení.

Model je navržený pro snadný 3D tisk bez podpěr. Jednotlivé díly do sebe jednoduše zapadnou, takže není potřeba lepidlo.

Vlastnosti

  • kapacita: 4 zkumavky

  • dvoupatrové vedení zkumavek pro stabilitu

  • jednoduchá montáž zasunutím dílů

  • tisk bez podpěr

Tisk

  • PLA/PETG

  • doporučená výška vrstvy: 0,2 mm

  • výplň: 15–20 %

  • podpěry: nejsou potřeba

  • doporučuji profil STRUCTURAL

Stojan je vhodný pro hobby experimenty. Minimalistický design zabírá málo místa na stole a zároveň drží zkumavky bezpečně oddělené.

==================================================

Minimalist stand designed for safe and organized storage of four test tubes. The structure consists of two side panels and two horizontal holders – the upper plate guides the test tubes while the lower plate supports them securely. This keeps the test tubes upright and prevents them from tipping over.

The model is designed for easy support-free 3D printing. Individual parts fit together simply, so no glue is required.

Features

  • capacity: 4 test tubes

  • two-level tube guidance for stability

  • simple assembly by sliding the parts together

  • support-free printing

Printing

  • PLA / PETG

  • recommended layer height: 0.2 mm

  • infill: 15–20%

  • supports: not required

  • recommended profile: STRUCTURAL

The stand is suitable for hobby experiments. The minimalist design takes up little desk space while keeping the test tubes safely separated.

Tags