DeWalt Battery Holder for Multiboard T-Bolts
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.90 – €2.32 net (excluding VAT)
For file: Dewalt Battery Holder for Multiboard T-Bolts_0.4n_0.2mm_PLA_COREONE_1h22m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.11 excluding VAT (range midpoint).
- Weight reported by the author
- 42 g
- Print time reported by the author
- 1.36 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
DeWalt Battery Holder using Multiboard and Multiboard T-Bolts.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 40
- Makes
- 0
- Views
- 185
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Garage
- License
- Creative Commons — Attribution — Share Alike
This DeWalt Battery Holder is designed to work with Multiboard and Multiboard 20mm T-Bolts.
Print using standard Multiboard printing guidance (3 perimeters, 0.2mm layer height, 15% infill, and no supports).
Model should print so the bottom is on the build plate which I found to provide enough surface area for adequate adhesion.