Cute Squirrel - No MMU/AMS needed - No supports
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Cute, tiny squirrel. No MMU/AMS needed. Version for multicolour printers also available.
- Rating
- 5 / 5
- Likes
- 9
- Downloads
- 49
- Makes
- 3
- Views
- 169
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Animals
- License
- Creative Commons — Attribution — Share Alike
Spring is here and the squirrels are back in the gardens.
You can print this design in two seperate parts and don't need any MMU/AMS. If you have a multicolour printer, there is also a .3mf version for you (Mulitcolour MMU).
Versions
Single colour: Tiny, single colour squirrel, feel free to scale up
Mulitcolour_splitted: Two seperate bodys for each colour, tolerances included
Multicolour_MMU: .3mf file without tolerances for multicolour printers
Printing
Please note, that you will maybe have to glue the two parts together afterwards, depending on your printer's tolerances.
If you need larger spacing between the two parts of the splitted version, just scale up the orange body a little bit. Another option is to scale the white part down.
Settings
min. 5s layer time, depending on your printer: Parts like the ears or the tiny single colour version need enough cooling.
If you have any questions or feedback, feel free to leave a comment
Changes
31.03.2026: Edited description and pictures