1 / 2
Hadley Shroud for Imperial no full reprint — image 1
1 / 2

Hadley Shroud for Imperial no full reprint

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A modification of the Vase mode shroud by Ivan Urbánek To re use as much of the existing print as possible

Rating
0 / 5
Likes
2
Downloads
21
Makes
0
Views
148
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Hey Hadley fans, im making this as a fan of the original shroud model. but i didn't like the idea of all my original parts going to waste. i figured i could just re print some rings with threads and boom drop and fit.

lots of tinkering in CAD later. i think i finally got it. 

(I recomended to print test prints of small slices of the threads and the shroud. cant speak for everyones slicer its possible vase mode behaves differently on different slicers)

In my Re print you only need to reprint your Middle mount bracket. 
you re use your imperial UTA and LTA. 

everything is scaled down slightly to fit the original hadley spacing. not Ivans size. that being said the vase mode prints from Ivans will not work. 



my total grams of printing all of it was 509 Grams of filament

by my estimate with my slicer the original remix by Ivan is 250 Grams more of filament


Bill of Materials:

In my use case i had to print 4 "HADLEY SHROUD A"s full size no cuts.

Then i printed a 5th "HADLEY SHROUD A" this one I cut with the Thick side mode to 60mm. this was for the TOP portion above the UTA.

I needed to print 2X "BottomRingThread" one to sit right ontop of the LTA and one to sit ontop of the UTA

i needed to print the Remix of the middle ring with planets. this is a combo of the Threaded base and the top Vase mode retaining ring.

and finally had to print 1 retaining ring labeled "RingTOP"


Step file included incase anyone wants it.

for anyone interested the Shroud A was scaled .952 of Ivans model
and the threads were scaled .957 from ivans model
and the cap was scaled .945 of ivans model. 

Tags