Sailor Moon Book Ends
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Bring the power of the Moon Kingdom to your bookshelf! This elegant, scalable bookend features the iconic silhouette.
- Rating
- 0 / 5
- Likes
- 10
- Makes
- 0
- Views
- 240
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Standard Digital File License
This model features intricate details true to the Sailor Moon aesthetic. Please use extra care when removing supports around the hair, ribbons, and wand. Using needle-nose pliers and a hobby knife is highly recommended. If you have the capability, soluble supports will provide the best out-of-the-box experience
Layer Height0.16mmThe "Sweet Spot" for capturing facial details and hair flows.
Infill Density25% (Gyroid)Provides necessary weight and strength for holding books.
Wall Loops 3 - 4Increases durability and prevents the infill from "ghosting" through.
Top/Bottom Layers 5 Layers Ensures a smooth, professional finish on flat surfaces.
Print Speed40-60 mm/s Slow down for the character side to ensure crisp features.
Support Strategy (Crucial)
Because this model is "heavy labor" for support removal, I recommend these specific tweaks to prevent heartbreak (and broken wands!):
Support Type: Tree Supports (Organic). They touch the model less and are much easier to "peel" away from delicate limbs.
Support Interface: If you have a multi-material unit (like a Bambu AMS or Prusa MMU), use Soluble Support Material (PVA) or PETG as an interface for PLA prints. This allows the supports to pop off with zero scarring.
Top Z Distance: If using standard supports, set this to 0.2mm - 0.24mm. It creates a slight gap that makes the bond "snap" rather than "tear."
Support Density: Keep it low (around 10-15%) to make the support structures themselves less rigid.