Improved Fysetc PanelDue 7i case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Fysetc Paneldue 7i case
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 6
- Makes
- 0
- Views
- 39
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Two version for the front:
front_1part : single front part to print
front_2part_A+_B: two parts, base front + front frame to print separately and use some glue for multi color look, the photo shows the two part glue version
Make sure to place them correctly for printing: front -> upside down
Same part requirements as the original design:
4x M3x16 bolts (for connecting the front, back and display , M3x12 worked for me too)
4x M4x10 bolts (for mounting the case to “multi joint hinge” by Tri_Engineer)
https://www.printables.com/model/819263-multi-joint-hinge4x M3 short or standard heatset inserts
4x M4 short heatset inserts