Triton Router Rack Post Cap
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Rack post cap for Triton router
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 7
- Makes
- 0
- Views
- 75
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Public Domain
Fits Triton TRA001 router. May fit other models from Triton, but I don't have any to test.
It's not quite the same as the original part as I made it more suitable for 3D printing.
Print upside down, with supports.
I printed it from Prusa PC Blend and it is working fine so far. There is a decent load on the part from the spring, so it may not last. Choose your material and print settings wisely to maximise layer adhesion as the spring is trying to pull the layers apart. I take no responsibility any injuries you may sustain if you print this part and it breaks, sending the spring flying into your eye. Use at your own risk.