Askar 140APO Wanderer Astro 190mm flat panel mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Askar 140APO Wanderer Astro 190mm flat panel mount
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 19
- Makes
- 0
- Views
- 154
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
Uses M6 screws and nuts to attach the pieces to each other and M3x60mm Screws and nuts to attach the flat panel to the mount. The M3 screws are screws through the motor base and the 3d printed base to the other side.
V2:
Increased the width of the adapter for better stability
Increased the length of the mounting plate and cut a notch in it so the cover fits below the adapter, thereby allowing the flat panel to be mounted in a more forward position to better align with the front of the scope. This allows the panel to close with or without the scope cover on.
Added more mounting holes as well as increased their diameter by 0.1mm for easier screw install
Increased the length of the protrusions that hold the M6 screws so that if a cover is put on, the cover rests on these protrusions rather than on the panel and the relatively fragile motor arms.
The structural zip tie on the flat panel nearest to the connectors can be left in place now.