Deathly Hallows inspired spool holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Disclaimer: It's a holder that needs a 12mm socket to remove three screws in order to change the filament. It won't be…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 2
- Makes
- 0
- Views
- 26
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
Disclaimer: It's a holder that needs a 12mm socket to remove three screws in order to change the filament. It won't be for everybody but it's the one I choose to design.
I struggled to find the perfect spool holder so I did my own.
I printed two walls of the provided STL, that were inspired by the Deathly Hallows.
For the spool holder I just used this one: Universal Filament spool Holder by butchja
https://www.thingiverse.com/thing:2070272
To connect both walls I used some hardware:
1xM8x1000mm rod
12xM8 washers
12xM8 nuts
2x608 bearings
Each rod part was cut to 14cm, so you can buy three 14cm M8 bolts instead.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
No
Resolution:
0,15
Infill:
20
Notes:
Printed slowly and with 0,15 resolution so the theads work like butter.
Category: 3D Printer Accessories