1 / 4
Johansson OSCAR S VarioBox Turnbuckle for Lids — image 1
1 / 4

Johansson OSCAR S VarioBox Turnbuckle for Lids

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

The VarioBox of the E-Bike OSCAR S from Johansson is not very stable; this turnbuckle fixes this.

Rating
0 / 5
Likes
0
Downloads
4
Makes
0
Views
43
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

The VarioBox of the E-Bike OSCAR S from Johansson has a lid-stability problem due to the long lever arm to the half-wooden-half-metal support on the sides.

Using a standard turnbuckle, these claws hold the lids and pull them towards the backrest. This way a passenger leaning to the side won't accidently disengage the backrest from the side lids.

You will additionally need:

  • a standard turnbuckle (7cm), 16cm in total maxed out, with M8 holes

  • 2x M8 x 18 or 20mm screws

  • 2x M8 flange nut

Print settings:

  • for mechanic sturdiness towards tension force I used PETG

  • 0.4 or 0.6mm nozzle is fine (I used 0.4)

  • 0.2mm layer height

  • for max stability I printed it totally solid, e.g. 5 top and bottom layers, 8 perimeters and 100% infill

Tags