Pipe end caps collection - 15-110 mm
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Pipe end caps: 15–110 mm. Inner = pipe / +1 mm / +2 mm. Top same diameter, 2 mm wall, 15 mm depth. STL set for common no
- Rating
- 5 / 5
- Likes
- 4
- Downloads
- 46
- Makes
- 1
- Views
- 133
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Public Domain
Use this generator if you need different variant:
https://michalmietlinski.github.io/hole-generator/
Additional options in CLI tool:
https://github.com/michalmietlinski/hole-generator
Pipe end caps — circular caps that slip over the pipe end. Inner diameter is the hole size (choose exact pipe size, +1 mm, or +2 mm for fit). Top has the same diameter as the hole (no wider rim). Cap thickness 2 mm, inlet depth 15 mm. Full set of STLs for common nominal pipe sizes.
Sizes (nominal pipe, mm):
15, 20, 25, 32, 40, 50, 63, 75, 90, 110
Variants per size:
Exact (inner = pipe)
+1 mm (inner = pipe + 1 mm)
+2 mm (inner = pipe + 2 mm
See also: