Guitar Stand Rubber Mount Replacement
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement part for the rubber band that secures the guitar on the stand
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 13
- Makes
- 1
- Views
- 111
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Music
- License
- Creative Commons — Attribution — Noncommercial
The rubber band on my old guitar stand broke a while ago, so I designed this replacement for the original rubber mount. Many manufacturers use a similar design, so it may work for other stands as well.
My stand is similar to this one: https://www.thomann.de/de/millenium_gitarrenstaender.htm.
The width of the holder is about 102 mm, and the inner diameter of the arms on which the rubber band is mounted is approximately 11.3 mm.
If your guitar stand has slightly different dimensions, you can scale and/or cut the model in PrusaSlicer. Alternatively, feel free to leave a comment and I can try to adjust the model.
I suggest printing it with a medium hard Flex / TPU filament with an infill of 15%.