Easter Spiral egg fidget toy
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Fun toy great decoration for easter
- Rating
- 0 / 5
- Likes
- 49
- Downloads
- 518
- Makes
- 2
- Views
- 1,736
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Public Domain
This is a classic "Impossible Passthrough" optical illusion featuring a egg. The model consists of two parts that appear to pass through each other at an impossible angle, creating a mind-bending visual effect. It’s a perfect desk toy, fidget, or a easter decoration.
The tolerances are tuned to be tight but smooth, ensuring the illusion works perfectly without too much wiggle room.
Print Settings
Material: PLA
Layer Height: 0.16mm or 0.2mm (lower layer height makes the sliding smoother).
Walls: 2 wall loops
Infill: 15% (Grid or Gyroid).
Supports: NO SUPPORTS NEEDED. Both parts are designed to be printed flat on the bed.
Brim: Recommended if you have bed adhesion issues, as the contact area is relatively small.
Tips for Success
Calibration: Ensure your Flow Rate and Pressure Advance are calibrated for a smooth fit.
Post-processing: If the fit is a bit too moving the parts back and forth a few times will make the action buttery smooth.
Filament: Dual-color or "Silk" filaments enhance the "impossible" look by highlighting the shifting reflections.