1 / 8
Remix of (SP-5impleOne Sapphire Plus CoreXY) — image 1
1 / 8

Remix of (SP-5impleOne Sapphire Plus CoreXY)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

I've made few changes to the "Motor 2040 RH + LH", some changes to "XY RH+LH Bottom+Top"

Rating
0 / 5
Likes
5
Downloads
13
Makes
0
Views
193
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

!!!!!!Important!!!!!!!
Before you print the motor brackets print the TEST_RH_LH first! make sure it fits well into the aluminum extrusion! 
I've printed mine with PETG filament at 0.9 extrusion.

If you chose to use XY RH+LH Bottom+Top with the changes that I've made make sure to first assemble the top part, XY RH+LH Top attached to aluminum extrusion with m5 and lock nuts (see picture of the gantry)

When leveling the gantry make sure to loosen the m5 top and bottom screws on the XY RH+LH Bottom+Top. Tighten the screws after linear rails were leveled and check if the gantry still moves freely.

I hope I didn't forget anything, print all the parts and make sure everything fits before you start destroying the old assembly ;)

Good luck!