A quacking joke
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
based on the a quacking joke t-shirt by GeryArts
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 3
- Makes
- 0
- Views
- 25
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A hueforge based on promo picture for a t shirt by by GeryArts I really liked
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm
#080a0d PLA PolyLite Black Transmission Distance: 0.3
#c00d1e PLA BambuLab Basic Red Transmission Distance: 4
#3a56ac PLA StrongHero3D GalaxyPurple Transmission Distance: 1.2
#ff9016 PLA BambuLab Basic Pumpkin Orange Transmission Distance: 5.5
#ffffff PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 5 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Red
At layer #11 (0.96mm) swap to GalaxyPurple
At layer #14 (1.2mm) swap to Pumpkin Orange
At layer #20 (1.68mm) swap to Jade White for the rest.