Std Tripod Thread x 12.7 x 8.7 Heat Sink Threaded Insert
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A model to represent a Heat Sink Threaded Insert for use in your designs. Not suitable for printing
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 21
- Makes
- 0
- Views
- 115
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial
Dimensions taken from the original brass insert and are approximately 8.7mm major diameter, 12.7mm length with an 1/4" - 20 UNC thread.
For use in your designs, not suitable for printing.
Other sizes:
M2.5 x 5.7 x 4.6 - https://www.printables.com/model/1733565-m25-x-57-x-45-heat-sink-threaded-insert
M3 x 4.0 x 5 - https://www.printables.com/model/1607555-m3-x-40-x-5-heat-sink-threaded-insert
M3 x 4.8 x 5 - https://www.printables.com/model/1606295-m3-x-48-x-5-heat-sink-threaded-insert
M3 x 5.7 x 5 - https://www.printables.com/model/1608883-m3-x-57-x-5-heat-sink-threaded-insert
M4 x 5.8 x 6.3 - https://www.printables.com/model/1614956-m4-x-58-x-63-heat-sink-threaded-insert
M5 x 9.5 x 7.1 - https://www.printables.com/model/1631402-m5-x-95-x-71-heat-sink-threaded-insert
M5 x5.8 x 7.1 - https://www.printables.com/model/1697590-m5-x-58-x-71-heat-sink-threaded-insert
M6 x 12.7 x 8.7 - https://www.printables.com/model/1631448-m6-x-127-x-87-heat-sink-threaded-insert