Pcar for the Gears Vector
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Pcar designed to improve accuracy and drop fps to below 120 (around 110ish with 1.2 gram workers)
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 7
- Makes
- 0
- Views
- 40
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Toys
- License
- Creative Commons — Attribution — Noncommercial
I've designed this pcar to make the gears vector legal for sub 120 fps nerf wars (fps is measured with 1.2 grams workers). The flycore with hurricanes and krakens typically hits a bit around 126-129 with the 1.2 gram darts, which is a bit too hot. So this pcar reduces the fps to around 110 fps and also improves accuracy. So pretty nice :)
If you want to design pcars for your own blasters, this is the recipe I'm using:
12.6mm internal diameter (from fin to fin), sometimes a 12.4mm diameter works a bit better. For the gears vector specifically I noticed it was more accurate with the 12.6 mm internal diameter.
the fins themselves have a 1 mm width and a fillet of 0.4mm.
The effective part of the pcar is 50 mm.
I use this recipe in other flycore blasters as well and it seems to work well (better accuracy and the fps is now under 120 fps).