Foot Splint
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a work in progress! Too much stress on the foot portion causes the yellow piece (foot_splint_1) to break. I'm…
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 44
- Makes
- 0
- Views
- 509
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
This is a work in progress! Too much stress on the foot portion causes the yellow piece (foot_splint_1) to break. I'm working to fix it now. In the meantime, if you do use it, make sure you use one on each leg as you won't be able to walk, which will keep the force down on this part! ;)
This Thing is to immobilize the foot, making it nearly impossible to walk. If a splint is worn on each leg, the wearer likely will be crawling.
Connect to foot/leg using a tie of your choice (long zip ties work very well). After you print both pieces, use at least 3 zip ties to connect the two together (1 per adjacent hole pair).
Use at your own risk!
Print Settings
Printer Brand:
Monoprice
Printer:
Maker Select
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
25%
Notes:
This was designed to be able to be printed on a 200x200mm print bed. You may have to remove any brims or skirts to make sure it fits on your print bed. However, if you have access to a print bed at least 320x320mm, you can print it in one piece (foot_splint_single-piece_reva.stl)!
Category: DIY