Wicked edge stone stop
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Stone stop to be used on >8" guide rods of wicked edge sharpeners
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 4
- Makes
- 0
- Views
- 38
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Open Community License v1
These are stone stops for the wicked edge knife sharpener in case you use guide rods longer than 8" or 30 cm. The treads are M5 and are modelled with additional tread clearance. Despite this it may be necessary to tread the M5 bolt in a few times with some force to clear the treads completely or use a tap before use.
I printed in PETG with 100% infill 0.15 mm structural but that may be a bit overkill.
Freecad file is included in case you want to change something.
The thumbscrews you can find here https://www.printables.com/model/472195-thumb-screw-knob