MTH DCS Handheld Remote Control Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I may be a little late to the party since MTH has (or will soon) discontinue the DCS Remote.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 50
- Makes
- 0
- Views
- 333
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I may be a little late to the party since MTH has (or will soon) discontinue the DCS Remote. But there are millions(?) of them out there so here is a holder for the remote so you don't have to set it on the layout (oh my - a mortal sin).
This one is pretty simple. It has three flat head screw holes to attach it to your layout or table.
No adjustments needed. Print it in the color you want or paint it.
On my Prusa i3 MK2, I used supports for the parts of the holder where it was needed. You may be able to get away without supports.
I've included the OpenSCAD code and the STL file. You will have to slice it for your printer. You can also submit the STL file to any of the 3D print web sites.
I could have done this in Fusion 360 and it would have looked much better but it would have taken 10 times as long to get an STL file.