Bed leveling 11x11 grid
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Bed leveling 11x11 grid Originally made to help me test and manually level an Ender 3 S1 Pro with a 220x220 bed.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 15
- Makes
- 0
- Views
- 42
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Test Models
- License
- Creative Commons — Public Domain
Two files. One is an 11x11 grid, the other is the same grid but filled in. It's a 3mf file with the grid and fill-ins as objects so you can tweak as needed.
I always had issues with first layer evenness and adhesion on my Ender 3 S1 Pro. I picked it up used and after a few weeks I ended up with a blob of death during an overnight print. It was a mess and I tried everything from tramming to Z offset to fix my bed to correct. Despite having the CR touch sensor stock, it could never print consistently unless I printed within a 50mmx50mm area in the center of the bed. I then discovered the bed was warped like most. I took the plunge and moved to Klipper firmware to gain more granular control of the bed shape, and after a few days of testing I now have a reliable bed mesh that is working really well. I could fine tune it further, but no need for perfect just yet.
I had this grid created via Claude and it has served me very well.
Hope this helps someone else.
Realistically it can be used with any printer on Klipper with a bed mesh config. For stock firmware printers with a level sensor it is still useful to gauge where your bed level needs to be adjusted.